Soft Starter for Asynchronous Motor- ATS01-12 A-110.480V-1.5.5.5 KW ATS01N112F

Provides smooth starting for your pumps, fans, compressors and machinery. Avoid mechanical stresses and extend their service life. Progressive start limits the starting and stopping noise of motors. Reduce hearing discomfort for operators on the workfloor.

This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (110V to 480V AC) and up to 1.5kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery.

It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation.

Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life. Range of product: Altistart 01.

Product or component type: Soft starter. Product specific application: Simple machine. Network number of phases: 1 phase. [Us] rated supply voltage: 110...480 V - 10...10 %.

Motor power kW: 2.2 kW, 3 phases at 230 V; 5.5 kW, 3 phases at 400 V; 1.5 kW, 1 phase at 230 V. Motor power: 3 hp, 3 phases at 230 V; 1.5 hp, 3 phases at 210 V; 7.5 hp, 3 phases at 460 V. Utilisation category: AC-53B conforming to EN/IEC 60947-4-2. Current consumption: 60 A at nominal load. Type of start: Start with voltage ramp.

Power dissipation in W: 1 W at full load and at end of starting; 61 W in transient state. Assembly style: With heat sink. Supply voltage limits: 99.528 V.

Supply frequency: 50...60 Hz - 5...5 %. Network frequency: 47.5...63 Hz. [Uc] Control circuit voltage: 110 V AC +/- 10 % at 35 mA; 24 V AC/DC +/- 10 % at 30 mA; 240 V AC +/- 10 % at 80 mA. Starting time: 1 s / 100; 5 s / 20; Adjustable from 1 to 5 s. Starting torque: 30...80 % of starting torque of motor connected directly on the line supply.

Discrete output current: 2 A DC-13, 3 A AC-15. Tightening torque: 1.9.2.5 N.

Electrical connection: 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit, Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit; 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit; Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit; Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit; 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit; Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit; 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit; 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit; Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit. Operating position: Vertical +/- 10 degree. Net weight: 0.28 kg.

Motor power range AC-3: 1.1.2 kW at 200.240 V 1 phase; 2.2.3 kW at 200.240 V 3 phases; 4.6 kW at 380.440 V 3 phases. Motor starter type: Soft starter.

Electromagnetic compatibility: Conducted and radiated emissions level B conforming to CISPR 11; Conducted and radiated emissions level B conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-2; EMC immunity conforming to EN 50082-1; EMC immunity conforming to EN 50082-2; Harmonics conforming to IEC 1000-3-2; Harmonics conforming to IEC 1000-3-4; Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11; Voltage/current impulse level 3 conforming to IEC 61000-4-5. Product certifications: B44.1-96/ASME A17.5 for starter wired to the motor delta terminal; C-Tick; CCC; UL; CSA; GOST. IP degree of protection: IP20.

Pollution degree: 2 conforming to EN/IEC 60947-4-2. Vibration resistance: 1 gn (f= 13.150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3.13 Hz) conforming to EN/IEC 60068-2-6.

Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60068-2-27. Relative humidity: 5.95 % without condensation or dripping water conforming to EN/IEC 60068-2-3.

Ambient air temperature for operation: -10.40 °C (without derating); 40.50 °C (with current derating of 2 % per °C). Ambient air temperature for storage: -25.70 °C conforming to EN/IEC 60947-4-2. 1000 m with current derating of 2.2 % per additional 100 m. This item is in the category "Business, Office & Industrial\Other Business & Industrial". The seller is "electricalwholesaler365uk" and is located in this country: GB.

This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South Africa.

Brand: Schneider Electric
MPN: ATS01N112FT